Command: cdrcache.sys

  CDRCACHE.SYS is a CD drive cache program. It improves the drive
  performance. Requires XMS memory, and at least a 386 computer.
  CDRCACHE.SYS has to be loaded in CONFIG.SYS / FDCONFIG.SYS.
  When FreeDOS is already running, you can load CDRCACHE.SYS later
  with DEVLOAD.

Syntax:

  In config.sys, either:
    device=cdrcache.sys device name cachesize
  or:
    devicehigh=cdrcache.sys device name cachesize

[Main menu] [top] (Syntax) [Options] [Comments] [Examples] [See also] [File]

Options:

  device     The same name of the device that you previously loaded 
             with your CD-ROM device driver.
  name       A new name which you will pass to shsucdx in the autoexec.bat
  cachesize  Specifies the cache buffer size in kilobytes. The cache is 
             stored in XMS memory.
             Minimum value is 128
             Maximum value is 65280
             Values below 100 are valid for compatibility with previous 
             versions of CDRCACHE.SYS. Below 100, sizes are interpreted
             as multiples of 0.25MB.
  Controlling the driver after loading:
    Use:
  echo command > name
  Command:
    F     Flush the cache.
    S     Show Statistics.
    I     Show statistics with extra technical Information.
    C     Clear statistics.
    Q     Quiet mode.
    N     Normal verbosity.
    V     Verbose/trace mode.
    0     Stop caching.
    1     Continue caching (after stop for instance).
    ?     Shows the help.
    name  Is the parameter passed to CDRCACHE.SYS (see example).

[Main menu] [top] [Syntax] (Options) [Comments] [Examples] [See also] [File]

Comments:

  Load CDRCACHE.SYS after loading your CD-ROM device driver (usually 
  uide.sys).
  As CDRCACHE.SYS (2003) is based on LBACACHE.SYS, please read the
  LBAcache documentation for some additional technical/programming
  details.

[Main menu] [top] [Syntax] [Options] (Comments) [Examples] [See also] [File]

Examples:

  In config.sys / fdconfig.sys:
    DEVICE=c:\fdos\bin\xcdrom.sys /D:FDCD0000
    DEVICE=c:\fdos\bin\CDRcache.sys FDCD0000 CDRCACH$ 2048
  then in autoexec.bat:
    c:\fdos\bin\shsucdx /D:CDRCACH$
  This allocates a 2048KB (2MB) cache buffer for a single IDE CD drive.
    echo F > cdrcach$    (flush cache)
    echo SCF > cdrcach$  (show statistics, then clear statistics and
                         flush cache)
    echo S > cdrcach$    (only show statistics)

[Main menu] [top] [Syntax] [Options] [Comments] (Examples) [See also] [File]

See also:

 (atapicdd.sys)
  devload
 (gcdrom.sys)
  lbacache
 (mscdex)
  shsucdx
  tickle
 (udvd.sys)
  uide.sys
 (xcdrom.sys)

[Main menu] [top] [Syntax] [Options] [Comments] [Examples] (See also) [File]

File:

  Please read this command's lsm file also.
  You will find the updated version (internet) here and
  the version described in this manual page here.
  The lsm file contains information about the name of the programmer,
  the download site, and some other command related information.

[Main menu] [top] [Syntax] [Options] [Comments] [Examples] [See also] (File)

  Copyright © 2004 Robert Platt, updated 2011 by W. Spiegl.

  This file is derived from the FreeDOS Spec Command HOWTO.
  See the file H2Cpying for copying conditions.